JBL CLIP 4 BATTERY INDICATOR PORTABLE
JBL CLIP 4 BATTERY INDICATOR ANDROID
JBL CLIP 4 BATTERY INDICATOR BLUETOOTH
JBL CLIP 4 BATTERY INDICATOR SERIES

It’s recommended that you have this done at a service center. If this is the culprit then replacing the battery will fix this. One factor that can cause this issue is a defective battery. Once done, check if you are able to charge the device.

JBL CLIP 4 BATTERY INDICATOR BLUETOOTH

Try to inspect the charging port of the Bluetooth speaker and if you find any dirt or debris then you can clean this off using a toothpick or simply by blowing to it until it gets removed. If debris is present in the charging port then this will prevent the speaker from being charged. Since this speaker is best used outdoors there’s a possibility that dirt or debris will enter its charging port. Method 4: Dirt present in the charging port

JBL CLIP 4 BATTERY INDICATOR ANDROID

You can use the charger of your Android phone for this. Try using a different charger brick then check if the issue still occurs. Some of the reasons why a charger won’t work is if its USB port is damaged or if it has a faulty internal board. When you use a defective charger to charge this speaker then this issue will usually occur. If the device charges then you will need to get a new cable for your Bluetooth speaker. You can use the cord of your Android phone if it uses a Type-C USB cable. To check if this is what’s causing the problem try using a different USB cable to charge the JBL Charge 4 Bluetooth speaker. It’s difficult to tell if the cord has been damaged just by looking at it. Sometimes the problem can be caused by a defective charging cord. Method 2: Try using a different charging USB cable to fix will not charge issue of JBL Clip 4 The device should now be in pairing mode.Īfter performing these steps try to check if the speaker will now charge. You can do this by pressing on the power button.

Press and hold the Volume up button and Play button.ĭo this until the device turns off which should be around 10 seconds.

This is a useful troubleshooting step to do when you are experiencing problems with the device such as when you can’t make a Bluetooth connection or when you are unable to charge it. Method 1: Perform a factory reset on JBL Clip 4Ī factory reset or hard reset will remove any data on this Bluetooth speaker and bring it back to its default settings. Here are the Clip 4 troubleshooting steps you need to do to fix the problem. This can be an annoying issue especially if the speaker is running low on power as you won’t be able to use it. One common problem that you might encounter with your JBL Clip 4 Bluetooth speaker is when its battery will not charge. What to do when your JBL Clip 4 won’t charge

Music play time: up to 10 hours (varies by volume level and audio content).

Battery charge time: 3 hours (5V/500mA).

Battery type: Lithium-ion polymer 3.885Wh.

Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK.

Bluetooth transmitter power: ≤ 10 dBm (EIRP).

Bluetooth transmitter frequency range: 2400 – 2483.5MHz.

Some of its features include a weatherproof body, integrated carabiner, and a 10 hour battery on a single charge. It has a good sound quality with rich bass allowing for an enhanced music experience.

JBL CLIP 4 BATTERY INDICATOR PORTABLE

The JBL Clip 4 is a popular portable Bluetooth speaker that’s easy to carry around.

JBL CLIP 4 BATTERY INDICATOR SERIES

To fix this you will need to perform a series of troubleshooting steps. It could be due to speaker settings, bad charging port, faulty charging cable, or a faulty charger. The JBL Clip 4 will not charge charge issue that you are experiencing can be caused by a number of factors.

Jbl clip 4 battery indicator